Setting Display Illumination; Activating/Deactivating Auto Answer; Adjusting The Loudspeaker Volume; Changing Ringtones - Siemens Gigaset S450 Owner's Manual

Setting display illumination

Depending on whether or not the handset
is in the base station you can set different
levels of display illumination. If it is
switched on, the display is permanently
dimmed.
¢ ¢
v Ð
Display
The current setting is displayed.
¤
Change multiple line input:
In Charger
On Off
Select or .
without Charger
Select On or Off .
Press the display key.
§Save§
a
Press and hold (idle status).
Activating/deactivating
auto answer
If you have activated this function, when
you get a call you can simply lift the
handset out of the base station without
having to press the talk key c.
¢ ¢
v Ð
Handset
Auto Answer
Select and press
‰
( = on).
a
Press and hold (idle status).
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree speaking to five different levels
and the earpiece volume to three different
levels. You can only make these
adjustments during a call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t
Open menu.
r
Select volume.
¢
Backlight
§OK§
Press display key if necessary
§Save§
to save the setting
permanently.
If t is assigned a different function,
e.g. when toggling (page 15):
Open menu.
§Options§
Volume Select and press
Configure setting (see above).

Changing ringtones

u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and
the "Crescendo" ring (6; volume
increases with each ring =
‰).
u
Ringtones:
You can choose between 15 different
melodies.
You can configure the following functions
with different ringtones:
u
Ext. Calls
: for external calls
u
Internal Calls
: for internal calls
u
All: the same for all functions
Settings for individual functions
Set the volume and melody depending on
the type of signalling required.
¢ ¢
v Ð
Audio Settings
Ringer Settings
q
Set, e.g. select
press
§OK§
¤
Change multiple line input:
r
Set volume (1–6).
s
Scroll to the next line.
r
Select melody.
Press the display key to save
§Save§
the setting.
In idle status, you can also open the menu
by pressing t briefly.
Ringer Settings
Handset settings
.
§OK§
¢
Ext. Calls
and
.
39