Setting Display Illumination; Activating/Deactivating Auto Answer; Adjusting The Loudspeaker Volume; Changing Ringtones - Siemens Gigaset sl550 User Manual

Handset settings

Setting display illumination

Depending on whether the handset is in
the charging cradle or not, you can acti-
vate or deactivate the display illumination.
If the charging cradle is switched on, the
display is permanently dimmed.
¢ ¢
w Ð
Display
The current setting is displayed.
¤
Change multiple line input:
In Charger
Select or Off.
On
without Charger
Select or Off.
On
Note:
When set to the handset's standby time is
On
reduced considerably.
Press the display key.
§Save§
a
Press and hold (idle status).
Activating/deactivating
auto answer
If you have activated this function, when
you get a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key c.
¢ ¢
w Ð
Handset
Auto Answer
Select and press
a
Press and hold (idle status).
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree speaking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during an external call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
38
¢
Backlight
‰
( = on).
§OK§
t
Press the control key.
r
Select volume.
Press display key if necessary
§Save§
to save the setting perma-
nently.

Changing ringtones

u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and
the "Crescendo" ring (6; volume
increases with each ring =
‰).
u
Ringtones:
You can select 10 different melodies or
any sound from My stuff (page 39).
You can configure the following functions
with different ringtones:
u
: for external calls
Ext. Calls
u
Internal Calls : for internal calls
u
: for set appointments
Appointments
(page 41)
u
All: the same for all functions
Settings for individual functions
Set the volume and melody depending on
the type of signalling required. With exter-
nal calls, you can also set the phone so
that it announces the name of the caller
after the first ring. However, the relevant
voice pattern must have been previously
recorded (page 20).
¢ ¢
w Ð
Audio Settings
Ringer Settings
q
Select setting, e.g.
and press
r
Set volume (1–6).
s
Scroll to the next line.
r
Select melody.
s
Only in
Ext. Calls
next line.
¢
Ext. Calls
.
§Save§
setting: scroll to the