Maintenance; Program Beverages - DeLonghi PrimaDonna S Evo ECAM51 55 Series Instructions For Use Manual

Hide thumbs Also See for PrimaDonna S Evo ECAM51 55 Series:
Table of Contents

Advertisement

Available languages

Available languages

6. The appliance goes back to the "Settings" menu;
7. Then press
to exit the menu.

8.3 Maintenance

Here you can find all the maintenance operations required by
the appliance over time:
Descaling: For instructions on descaling, see section "15.
Descale".
Install filter/Replace filter/Remove filter: For instruc-
tions on how to install, replace or remove the filter (C4),
see section "17. Water softener filter".
Emptying the circuit:
To select the operation, proceed as follows:
1. Press
(B2) to enter the "Settings" menu;
2. Press the selection arrows
"Maintenance" is displayed between the two dotted lines;
3. Press
(B3) to confirm;
4. Press the selection arrows
circuit emptying" is displayed between the two dotted
lines;
5. Press
;
6. "Confirm?": Press
to the previous screen;
7. "Empty grounds container": extract and empty the
grounds container (A20). Press
8. "Empty drip tray": empty the drip tray (A24) and put back
in the appliance complete with grounds container and
grille (A23). Press
9. "Place 0.5l container under spouts": position a container
under the coffee spouts (A14) and hot water spout (C6).
Press
;
Important! Danger of burns
Do not leave the appliance unattended while the circuit is
emptying.
10. "Rinsing, Please wait": the appliance performs a rinse cycle
from the coffee spouts;
11. "Empty water tank": remove the tank (A18), empty it com-
pletely, then press
12. (If the filter is installed) "Remove filter": remove the filter
from the tank, then press
13. "Insert tank, Press OK": put the tank back in then press
;
14. "Water circ. emptying underway": wait for the appliance to
empty the circuit; (Important: hot water from the spouts!);
As the circuit empties, the appliance may make more
noise: this is completely normal.
15. "Empty drip tray": remove, empty and reposition the drip
tray, then press
16. "Emptying complete press ok to turn off": press
The appliance goes off.
(B4) or
(B5) until
or
until "Water
to confirm or
to go back
;
;
;
;
;
Please note!
The next time you turn the appliance on, the circuit will need to
be filled: follow the instructions in point 3 of section "5.4 Set-
ting up the appliance".

8.4 Program beverages

The appliance is set by default to automatically deliver standard
quantities. To modify this quantity and customise the directly
selected beverages and the "DRINK MENU"
ceed as follows:
1. Prepare the appliance for preparation of the beverage as
described in section "4.2 Making automatic recipes using
coffee beans" or sections "5.3 Filling and attaching the milk
container" and "10.1 Adjusting the amount of froth";
2. Press
(B2) to enter the "Settings" menu;
3. Press the selection arrows
"Prg. beverages" is displayed between the two dotted
lines;
4. Press
(B3) to confirm: the appliance will list the
beverages that can be customised;
5. Press the selection arrows
sired beverage is displayed between the two dotted lines:
press
to confirm;
6. Beverages with coffee: the display shows "Program
aroma": press the selection arrows
selecting the desired aroma (see section "4.1 Temporarily
varying the coffee aroma"), press
selection. Beverage preparation then commences and
the display shows "Program coffee" with a progress bar
that indicates the quantity delivered: once the desired
quantity has been delivered, press
Cappuccino and milk-based coffees: after having se-
lected and confirmed the aroma, beverage preparation
commences and the display shows "Program milk" with a
progress bar that indicates the quantity of milk delivered:
once the desired quantity has been delivered, press
or
. The appliance then prepares the coffee: press
or
tity of coffee has been delivered.
Hot water: press
the desired quantity has been delivered, press
.
7. "Save parameters?": to save the settings, press
(otherwise press
8. "Parameters saved" (or "Parameters not saved"). The appli-
ance is ready for use again.
Press
or
.
35
(B4) or
or
or
to confirm the
to stop delivery when the desired quan-
. Delivery commences: once
or
).
to terminate the preparation at any time.
(B4), pro-
(B5) until
until the de-
until
or
.
or
or

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primadonna s evo ecam510.55.m

Table of Contents