Cornelius Post-Mix Valves UFB-1 Training Manual page 33

17. What are the three basic steps to set the ratio on a valve?
(circle the three correct answers)
A. Adjust syrup ratio
B. Set water flow rate
C. Set portion size
D. Cool product.
18. How can you identify the valve flow rate?
(circle the correct answer)
A. Decal on inside of cover
B. Printed on valve body
C. Color of valve
D. Printed on flow control retainer.
19. What is the minimum VA transformer required for a valve?
(circle the correct answer)
A. 40
B. 60
C. 80
D. 100.
20. At what intervals (frequency) should maintenance procedures be performed?
(circle the two correct answers)
A. Every 30 days
B. Every 3 months
C. Every 6 months
D. After every service call.
© 1999-2005, IMI Cornelius, Inc.
UF-1 and UFB-1 Valves Training Manual
- 27 -