Cornelius Post-Mix Valves UFB-1 Training Manual page 21

8. When the foam in the cup has lowered, press and release the large rectangular
button. The valve dispenses a top-off and shuts off when the foam again
touches the lever. The LED is now on steady.
9. Press the program switch until the LED turns off.
10. If you wish to disable the top-off, follow steps 1 through 3. Remove the cup
from the lever. This will enter a zero value for the delay time and disable the
top-off fill. Press the program switch for 3 seconds.
PGM lights
(not visible unless in
programming mode)
Note: The Optifill
© 1999-2005, IMI Cornelius, Inc.
TM
valve does not have an adjustment for sensitivity.
UF-1 and UFB-1 Valves Training Manual
Program switch
(hidden)
- 15 -