Use The Message Waiting Indicator - NEC GT890 User Manual

Tap on to access more symbols.
Note:
To configure keyboard and input options, go to LCD menuSettingsBasic

Language & KeyboardKeyboard and Input Methods.
Users could touch and press the key on the keyboard for about 2 seconds to input the alternative

character. For example, touch and press the "+" key for about 2 seconds can get the selection "±".

Use the Message Waiting Indicator

The ITX-3370 message waiting indicator LED is on the upper right corner of the device. It could notify the
users with different messages and status of the phone. Please refer to the status description below. The
priority for the LED indicator is from high to low in the following table.
Color LED Status
Fast Flashing
Solid
Slow Flashing
Flashing
Solid
Fast Flashing
OFF OFF
Figure 33: English Keyboard - More Symbols
Table 11: ITX-3370 MWI LED Status
Description
Incoming call.
Calling, Talking, Conferencing, Screensaver on when the
LCD is off.
A call is on hold.
Missed call (s), New voicemail (s), New SIP Message (s).
High memory usage, Maximum contact storage, Network
disconnect.
Upgrading.
Normal.
37