Table of Contents
Advertisement
2. Pull out the tab from the handset cradle (see figure below);
3. Rotate the tab and plug it back into the slot with the extension up to hold the handset while the
phone is mounted on the wall.
4. Connect the handset and main phone case with the phone cord;
5. Connect the LAN port of the phone to the RJ-45 socket of a PoE Switch or a router (LAN side (PoE)
of the router) using the Ethernet cable.
The LCD will display the booting up screen or firmware upgrading information. Before continuing,
please wait for the main screen display to show up;
6. Attach the phone to the wall via the wall mount hole. Refer the specification of screws;
7. Using the web configuration interface or from the menu of the touch screen, you can further
configure network connection using static IP, DHCP etc.
Figure 7: Tab on the Handset Cradle
Specification of screws for wall mount
Figure 8: Wall mount screw
19
Advertisement
Table of Contents
