1.4 Installing the Printer
Remove the packaging fixture and tapes (which are used for transportation)
Install or replace the ribbon cartridge
Make sure the printer is turned off and unplugged.
Please follow the steps below when you replace the ribbon cartridge. We recommend that your
use the genium ribbon cores or cartridge ribbons, low quality consumables will reduce lifespan of
your printer.
1)
Open the transparent cover as the arrow direction in Fig. 1-4, do not press it heavily.
2)
Move the adjust lever to the top position as Fig. 1-5
Fig. 1-3
Fig. 1-4
Fig. 1-5
3