Chapter 4 Parameter Settings; How To Set The Parameter - Print-Rite PR-855 User Manual

Chapter 4 Parameter Settings

EDS settings (DIP switch settings ) can save the settings when power down, the settings are as
follows:
1)
Longitudinal calibration parameter settings
2)
System parameter settings
3)
Emulation parameter settings
4)
Resetting to defaults

4.1 How to Set the Parameter

1)
Long press [PRINT MODE] and power on the printer at the same time, release the key until
the printhead stops moving.
2)
Load A4 paper horizontally, printer will feed automatically and start to print, if printer reject
the paper, reload it.
3)
Select the previous item by pressing [LOAD/UNLOAD](decrease set value), select the next
item by pressing [TEAR OFF] (increase set value).
4)
Long press [ONLINE] and press [PRINT MODE] at the same time, you can go back to the
previous menu.
5)
Restart the printer.
Note: After adjusting the parameters, you need to press the key [ONLINE] to save. Please refer
to Fig. 4-1.
18