Table of Contents
Advertisement
2)
There is a adjuster on the left of the paper guide which is for feeding location. As shown in
Fig.2-12, you can move the adjuster left and right. The moving part of the regulator has a
scale that you can use to determine the paper feeding position.
3)
Open the cover before feeding, and adjust the lever according to the thickness of the paper
as Fig. 2-13. Details please refer to chapter 2-4.
4)
Turn on the printer, the printer beeps and the paper out light flashes.
5)
Insert the printing paper face up as the arrow in Fig. 2-14. The printer will feed automatically
the paper to the printing position. The ONLINE indicator light is on. It's ready to print.
Note: Please put the paper correctly before you feeding. Please reject it if the paper is slanting.
Turn off the printer if you can't reject, and reject the paper by turning the knob.
Fig. 2-12
Fig. 2-13
Fig. 2-14
12
Advertisement
Table of Contents
