Usage of wax paper
Please install the wax paper according to Fig. 2-3.
2.2 Installing Chain Paper
1)
Check the position of release lever, adjust the lever to the front (chain paper icon position)as
Fig. 2-4.
2)
As shown in Fig. 2-5, place the perforated paper to be printed behind the printer. The height
of the paper should be lower than the printer.
3)
Adjust the position of adjustment lever according to the thickness of paper before feeding as
Fig. 2-6. The adjustment method is shown in this Chapter 2-4.
Fig. 2-4
Fig. 2-5
Fig. 2-6
9