Table of Contents
Advertisement
6)
Delay detection (flat-bed feeding)
The time that printer will wait when load a single paper.
0.5 sec
1 sec
1.5 sec
2 sec
7)
Silent printing
Automatic: Automatically adjust whether or not to print silently according to the printed
content.
Invalid: The sound is normal when printing and the print is good.
Valid: Less sound when printing, but the print is not good.
8)
Broken pin number
0: Indicates that there is no broken needle in the printhead.
1-24:Indicates the broken pin number of the printhead.
① Broken pin compensation:
When the pin number is set from 1 to 24, the broken pin compensation function is activated.
The data at the location of the broken pin can be printed with the adjacent normal pin to
achieve the normal printing effect. And the printhead life can be increased.
② How to judge the broken pin:
When you print pin testing page, if there is a horizontal line after the pin number, it means
pin of this number is intact, and the number will be set as 0 as default. If there is no
horizontal line after the number, it means this pin is broken, and you need to set the pin
number and start the broken pin compensation function.
Note: Only one broken pin can be set under this function, please contact with local dealer or
maintenance station if too much broken pins. When you choose this function, it will feed
backwards sometimes, and it will print for several times till finish.
9)
Compress printing
Invalid: set as default, compress printing is invalid.
Valid: printer will compress the data crosswise to 75%.
10) Form printing
Valid: The printer will switch to Uni-D printing automatically when printing forms, effectively
correcting column misalignment.
Invalid: The printer will print Bi-D when printing forms.
11) Reject paper automatically when power on
22
Advertisement
Table of Contents
