Print-Rite PR-855 User Manual page 29

2)
Print
If printer doesn't work or stop working when printing, please check according to the form
below.
Inspection
Is USB cord connected or not?
Is the ONLINE light on or not?
Is the PAPER OUT light on or not?
Does printer beep continuously?
Is there a paper jam?
Does the ribbon cartridge prevent the
printhead from moving?
Does printer work with application
software well?
Can printer conduct self-checking?
If print fuzzy or irregularly, please check according to the form below.
Inspection
Is the ribbon cartridge installed well?
Is the ribbon cartridge damaged?
Adjust lever position is correct?
If there is missing points, please check according to the form below.
Inspection
Are the missing points irregular?
Do the missing points appear on the
same line?
If the long string of the printing form is out of alignment, please check according to the form
Make sure the USB cord is connected with computer and
printer well.
If not, press the key [ONLINE].
If yes, please load paper.
Stir the release lever to the initial position.
Power off and clear the paper, make sure the edge of
feeding paper is smooth.
Power off and take the ribbon cartridge out, make the
ribbon straight or replace it.
Make sure the installation of software is correct. Reinstall it
if necessary.
Power off and reset the printer to conduct self-checking
function. Please contact with the dealer if not.
Reinstall it if necessary.
Replace it if necessary.
Stir the lever to the lower position.
Power off and take out the ribbon cartridge, turn the
knob to make it tight.
This printhead is damaged, please change a new one or
replace the pins.
27
Solutions
Solutions
Solutions