Automatic Exposure Adjustment - Sharp AL-1041 Operation Manual

AUTOMATIC EXPOSURE ADJUSTMENT

The automatic exposure level can be adjusted to suit your copying needs.
Press the exposure mode selector key to select the photo (
1
Press and hold down the exposure mode selector key for approximately 5 seconds.
2
The photo (
two exposure indicators corresponding to the automatic exposure level which has
been selected will light up.
Press the light (
3
level as desired.
If exposure level 2 is selected, the two left-handmost indicators for that level will light
up simultaneously. Also, if level 4 is selected, the two right-handmost indicators for
that level will light up simultaneously.
Press the exposure selector key. The AUTO indicator will stop blinking and light up
4
steadily.
This automatic exposure level will remain in effect until you change it again by
this procedure.
) indicator will go out and the AUTO indicator will begin to blink. One or
) or dark ( ) key to lighten or darken the automatic exposure
) mode.
6
37