Sharp AL-1041 Operation Manual page 27

USER PROGRAMS
Press the print (
3
currently selected parameter number for the program will blink on the right side of the
display.
Select the desired parameter using the right copy quantity (
4
parameter number will blink on the right of the display.
Program
No.
4
Factory default settings are indicated with an asterisk (*).
Press the print (
5
the entered value will be stored.
Press the light (
6
26
) key. The entered program number will be steadily lit and the
Mode
1 Auto clear time
2 Preheat mode
3 Auto power shut-
off timer
5 Auto power shut-
off mode
) key. The right-hand number in the display will be steadily lit and
To change the setting or to set another mode, press the clear (
copier will return to step 2.
) or dark (
Parameters
0 e OFF 1 e 30 sec. * 2 e 60 sec.
3 e 90 sec. 4 e 120 sec.
0 e 30 sec. 1 e 60 sec. * 2 e 90 sec.
0 e 2 min. * 1 e 5 min.
3 e 30 min. 4 e 60 min.
0 e OFF * 1 e ON
) key to return to the normal copy mode.
) key. The entered
2 e 15 min.
5 e 120 min.
) key. The