Installation; Copier Installation - Sharp AL-1041 Operation Manual

2
Follow the installation procedure below to use the copier properly.

COPIER INSTALLATION

2
Improper installation may damage the copier. Please note the following during initial installation
and whenever the copier is moved.
Do not install your copier in areas that are:
damp, humid, or very dusty
exposed to direct sunlight
poorly ventilated
subject to extreme temperature or humidity
changes, e.g., near an air conditioner or
heater.
8

INSTALLATION

If the copier is moved from a cool place to a warm place, condensation may
form inside the copier. Operation in this condition will cause poor copy quality
and malfunctions. Leave the copier at room temperature for at least 2 hours
before use.