Sharp AL-1041 Operation Manual page 13

INSTALLING THE TD CARTRIDGE
Remove the CAUTION tape from the front cover and remove the two protective pins
2
from the fusing unit by pulling the strings upward one at a time.
2
Push gently on both sides of the front cover to open the cover.
3
Remove the TD cartridge from the bag. Remove the protective paper. Hold the cartridge
4
on both sides and shake it horizontally four or five times.
Hold the tab of the protective cover and pull the tab to your side to remove the cover.
5
12
CAUTION tape
4 or 5 times
Protective pins