Two-Sided Copying - Sharp AL-1041 Operation Manual

BYPASS FEED
Set the paper guides to the copy paper width. Insert the copy paper (print face down)
3
all the way into the bypass tray.
3
Press the tray select (
4
using standard copy paper. Press the print (

TWO-SIDED COPYING

Two-sided copying can be made on this copier using the bypass tray.
Example: The following two originals will be copied onto two sides of copy paper.
First original
22
To close the bypass tray, perform
step1 and then step 2 in the
illustration and push the round
projections at the right of the tray
until they click.
Paper must be fed narrow side into the feed slot.
Transparency film, labels, and other special purpose papers must be fed
individually.
When copying onto transparency film, remove each copy promptly. Do not let
copies stack up.
Second original
) key to select the bypass tray. Set the number of copies if
) key.
Face up or face down
Face up
Print face
Face down