User Maintenance; Cabinet; Original Table And Original Cover - Sharp AL-1041 Operation Manual

Remove the new drum cartridge from the protective bag and remove the protective
4
cover from the cartridge. Then gently install the new drum cartridge.
Do not touch the surface of the drum (green portion) of the cartridge. Doing so
may cause smudges on the copies.
Gently install the TD cartridge. To install the TD cartridge, see page 11, INSTALLING
5
THE TD CARTRIDGE.
Close the front cover and then the side cover by pressing the round projections near
6
the side cover open button. The drum replacement required (
and the ready (
When closing the covers, be sure to close the front cover securely and then
close the side cover. If the covers are closed in the wrong order, the covers
may be damaged.

USER MAINTENANCE

Proper care is essential in order to get clean, sharp copies. Be sure to take a few minutes to
regularly clean the copier.
Do not use thinner, benzene or other volatile cleaning agents. Doing so may
cause deformation, discoloration, deterioration or malfunction.
Before cleaning, be sure to turn the power switch off and remove the power
cord from the outlet.

Cabinet

Wipe the cabinet with a soft, clean cloth.

Original table and original cover

Stains on the glass or cover will also be copied. Wipe the glass and the cover with a soft, clean
cloth. If necessary, dampen the cloth with water or a glass cleaner.
Original table
) indicator will light up.
DRUM CARTRIDGE REPLACEMENT
) indicator will go out
Original cover
5
29