Sharp AL-1041 Operation Manual page 24

Place the first original on the original table and make a copy.
1
The first copy can be made using either the paper tray or the bypass tray.
Replace the first original with the second original on the original table and close the
2
original cover. Make sure that the first and second originals are oriented in the same
way on the original table.
For tablet binding, turn the first copy over left to right as shown below. For booklet
3
binding, turn the first copy over top to bottom (not shown). Feed the first copy into the
bypass tray.
Press the tray select (
4
Be sure to feed the copy paper one sheet at a time.
A
A
) key to select the bypass tray and press the print (
B
TWO-SIDED COPYING
) key.
3
23