Special Functions; Two Sided Copying - Sharp AL-1217D Operation Manual

6
This chapter describes the special functions of this unit. Use these functions as
needed.

TWO SIDED COPYING

When copying from the SPF/RSPF, two-side originals can be copied automatically
without having to manually turn them over. Automatic two-sided copying can also be
performed without using the SPF/RSPF. When copying from one-sided originals to
two-sided copies, copying orientation can be selected between Turn on Long Edge
and Turn on Short Edge.
A A
Making two-sided copies
1
Place the original on the original table or in the SPF/RSPF. (see
"ORIGINAL PLACEMENT" (p.47).
2
Select two-sided copy mode.
52
Downloaded from:

SPECIAL FUNCTIONS

• When making two-sided copies from the original table, the paper size
must be A4, letter. When making two-sided copies from the SPF/
RSPF, A4, B5, A5, letter, legal, and invoice sizes can be used. Non-
standard size paper cannot be used.
• When making two-sided copies, the multi-bypass tray cannot be used.
• When using two-sided invoice size originals from the SPF/RSPF, be
sure to place them in the landscape orientation. Otherwise, an original
misfeed will occur.
A
A
Turn on Long Edge
http://www.usersmanualguide.com/
A A
Turn on Short Edge
A
A