Supermicro SuperServer SYS-510P-M User Manual page 77

11. If cross-controller RAID is required, select Enable RAID spanned over VMD Controller
as shown in the figures below.
Figure 6-1. Created Volume without
enabling RAID spanned over VMD
controller
12. Select specific disks for RAID with an [X].
•
RAID0: Select at least two [2 - 24] disks
•
RAID1: Select only two disks
•
RAID5: Select at least three [3 - 24] disks
•
RAID10: Select only four disks
13. Select Strip Size (Default 64KB).
14. Select Create Volume.
15. If another RAID is needed, start again at step 6.
16. Press [F4] to save and reboot.
Chapter 6: Optional Components
Figure 6-2. Created Volume with
enabling RAID spanned over VMD
controller
77