Faceplate & Door Frame Overlay Installation - Regency Fireplace Products HZ54E-NG1 Owners & Installation Manual

INSTALLATION
1) Install the door frame overlay by hooking the top fl ange over top of
the glass door, push in the bottom of the door frame overlay to secure
in place.
Door Frame
Overlay
Magnet Position
2) Place 3 of the supplied magnets on the lower corners of the Door
Frame Overlay, this will keep the Faceplate in position after it has
been installed.
52
FACEPLATE &
DOOR FRAME OVERLAY INSTALLATION
Glass Door
3) Secure the left side mounting bracket to the backside of the faceplate
as shown below. Use 3 screws supplied to secure the mounting
bracket in place. Repeat for right side.
Left Side
Mounting Bracket
NOTE: Ensure that the faceplate is positioned correctly when installing
the mounting brackets to the faceplate. There is a top and bottom,
the top of the faceplate has a full 1" return whereas the bottom only
has a 1/2" return as shown in the diagram below.
Mounting Bracket
shown in place
Regency Horizon HZ54E-1 Gas Fireplace