Advertisement
Step 14
You will need:
Dowel
1 x
(H1)
5 x Small Cam
Bolts
(H10)
Insert 1 x Dowel (H1) into Drawer Front (P10).
Attach 5 x Small Cam Bolts (H10) as shown.
Step 15
You will need:
5 x Small Cam
Nuts
(H11)
Insert 5 x Small Cam Nuts (H11) into the holes of
Drawer Sides (P12,P13) and Support Rail (P16).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Drawer Side (P12,P13) and Support Rail (P16) into place and tighten the cam nuts.
Step 16
Slide Drawer Base (P14) into the groove in Drawer Sides (P12,P13).
H10
(P12)
H11
H11
(P10)
(P12)
(P10)
H10
H10
H1
H10
(P10)
This is how a cam nut works ........
(P16)
H11
(P13)
H11
(P14)
(P13)
H10
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
H11
Page 9
Advertisement
