Download
Share
Print this page
fantastic furniture COMO LOWLINE SMALL Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. fantastic furniture Manuals
  4. Indoor Furnishing
  5. COMO LOWLINE SMALL
  6. Assembly instructions manual

fantastic furniture COMO LOWLINE SMALL Assembly Instructions Manual

1200mm
Hide thumbs

Advertisement

Quick Links

Download this manual
Assembly Instructions
COMO
LOWLINE SMALL 1200MM
VER 1.1

Advertisement

loading

Related Manuals for fantastic furniture COMO LOWLINE SMALL

Summary of Contents for fantastic furniture COMO LOWLINE SMALL

  • Page 1 Assembly Instructions COMO LOWLINE SMALL 1200MM VER 1.1...
  • Page 2 WARNING WARN NG FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY Lay out all of the components on a soft surface Read Instructions carefully. as if you were preparing to do a jigsaw puzzle. Check no parts are missing.

  • Page 3: What You Need

    What You Need To Assemble The Body Top Panel (P1) Right Side (Tools not provided) Panel Flat BladeScrewdriver Phillips Head Screwdriver (P3) Mallet Divider Back Panel Rail (P7) (P10) (P4) Shelf Panel (P6) Rail (P5) Left Side Panel Divider (P2) Rail (P8) (P9)
  • Page 4 Step 1 (P3) You will need: 1 x CL Runner Track (H6) 1 x CR Runner Track (H7) 6 x Small Screws (P2) (H5) Attach 1 x CL Runner Track (H6) to Left Side Panel (P2) and 1 x CR Runner Track (H7) to Right Side Panel (P3) with 6 x Small Screws (H5).
  • Page 5 Step 4 You will need: 2 x Cam Nuts (H4) (P6) This is how a cam nut works ..(P4) The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
  • Page 6 Step 7 H12 H12 (P9) You will need: 1 x Cam Nut (H4) (P8) 2 x Long Screws (H12) (P5) Insert 1 x Cam Nut (H4) into the hole of Divider (P8). Rotate the cam nuts so the arrows point towards the incoming cam bolt. Push Divider (P8) onto Rail (P5) place and tighten the cam nuts.
  • Page 7 Step 10 (P2) You will need: (P6) 4 x Cam Nuts (H4) (P9) (P5) (P3) Insert 4 x Cam Nuts (H4) into the holes of Shelf Panel (P6) and Rails (P5,P9). Rotate the cam nuts so the arrows point towards the incoming cam bolts. Push Left Side Panel (P2) into place and tighten the cam nuts.
  • Page 8 Step 12 You will need: 6 x Cam Bolts (H3) (P1) Attach 6 x Cam Bolts (H3) into Top Panel (P1) as shown. Step 13 You will need: (P1) 6 x Dowels (H1) 6 x Cam Nuts (P3) (H4) (P7) (P2) Turn carcase onto feet.
  • Page 9 Step 15 You will need: 5 x Small Cam Bolts (H10) Dowel (P11) (H1) Insert 1 x Dowel (H1) into the hole of Drawer Front (P11). Attach 5 x Small Cam Bolts (H10) as shown. Step 16 (P17) You will need: (P13) 5 x Small Cam Nuts...
  • Page 10 Step 18 You will need: 6 x Screws (H2) (P16) (P13) (P15) (P14) (P11) Attach Drawer Back (P16) to Drawer Sides (P13,P14) with 4 x Screws (H2),then attach Drawer Back (P16) to Support Rail (P17) with 2 x Screws (H2). Make sure that the groove lines up the whole way around the drawer.
  • Page 11 Step 21 Top View Left (P11) Right (P12) There are specific Left (P11) and Right (P12) Drawers. Put the drawers into the chest.So the drawer fronts align with the outside of the side panels. Please make sure your chest is sitting squarely on the floor,then tighten all the screws and bolts –...