Advertisement
Step 4
You will need:
3 x CL Runner
Tracks
(H6)
9 x Small
Screws
(H5)
Attach 3 x CL Runner Tracks (H6) to Divider (P4) with 9 x Small Screws (H5).
Step 5
You will need:
3 x CR Runner
Tracks
(H7)
9 x Small
Screws
(H5)
Turn Divider (P4) over to the other side, and then attach
3 x CR Runner Tracks (H7) with 9 x Small Screws (H5).
Step 6
You will need:
Dowel
1 x
(H1)
1 x Cam Bolt
(H3)
1 x Cam Nut
(H4)
Insert 1 x Cam Nut (H4) into the hole of Rail (P6).
Rotate the cam nut so the arrows point towards the incoming cam bolt.
Insert 1 x Dowel (H1) into Rail (P6). Attach 1 x Cam Bolt (H3) into Rail (P6) as shown.
Attach 3 x Rails (P5) and Rail (P6) to Right Side Panel (P3),
then tighten the cam nuts.
H5
H5
CL
H6
H5
CR
H7
(P3)
H5
H5
H6
H5
H5
H6
H5
(P4)
H5
H5
H5
H7
H5
H5
H5
(P4)
This is how a cam nut works ........
(P5)
(P5)
(P5)
H4
H5
H5
H5
H5
H5
H7
H5
H7
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
H3
H1
(P6)
Page 5
Advertisement
