Summary of Contents for fantastic furniture Como TV Stand Rectangle
Page 1
Version 1.0 Como TV Stand Rectangle fantasticfurniture.com.au...
Page 2
We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture Page 2 fantasticfurniture.com.au...
Assembly Checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly.
What you need to assemble the product Top Panel (P1) DO NOT USE Other tools you need: Phillips head screwdriver; Hammer Divider (P5) Left Side Panel (P3) Divider Shelf Panel Divider (P5) Right (P2) (P5) Side Panel (P4) Right Divider Side Panel (P5) (P4)
Page 5
Step 1 You will need 8 x Cam Bolts Phillips Head (H2) Screwdriver (P1) Attach 8 x Cam Bolts (H2) into Top Panel (P1). Tighten Cam Bolts using a Phillips head screwdriver. Step 2 You will need (P3) x 2 16 x Cam Bolts Phillips Head (H2)
Page 6
Step 3 (P2) You will need 4 x Cam Nuts Phillips Head (H3) Screwdriver (P3) This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
Page 7
Step 5 (P4) You will need 8 x Dowels 8 x Cam Nuts (P5) (P3) (H1) (H3) Phillips Head Screwdriver (P5) (P2) Insert 4 x Cam Nuts (H3) into the holes of Shelf Panel (P2) as shown. Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Side Panels (P3, P4) to Shelf Panel (P2), then tighten the cam nuts using a Flat head screwdriver.
Step 7 (P1) You will need 8 x Cam Nuts Phillips Head (H3) Screwdriver (P4) (P4) Insert 8 x Cam Nuts (H3) into the holes of Side Panels (P3, P4). Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Top Panel (P1) and tighten the cam nuts using a Flat head screwdriver.