Advertisement
Step 12
You will need:
Dowels
6 x
(H1)
6 x Cam Nuts
(H4)
CAREFULLY TURN
UNIT OVER
Insert 6 x Dowels (H1) into
Side Panels (P2,P3) and Divider (P4).
Insert 6 x Cam Nuts (H4) into the holes of Side Panels (P2,P3) and Divider (P4).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) and tighten the cam nuts.
Step 13
You will need:
28 x Small
Screws
(H5)
CAREFULLY LAY
UNIT ON FRONT
Put 2 x Back Panels (P9) into the groove on
the back of the chest ,screw them with
28 x Small Screws (H5). Holes are not pre-drilled so you need to
put some pressure with screwdriver to get started. Lift unit back up.
(P1)
H1
H1
H4
(P2)
(P9)
H4
H4
H1
(P9)
H1
(P3)
H5
H5
Page 8
Advertisement
