fantastic furniture COMO Assembly Instructions Manual page 6

Step 7
You will need:
1 x Cam Nut
(H4)
Insert 1 x Cam Nut (H4) into the hole of Divider (P4).
Rotate the cam nut so the arrows point towards the incoming cam bolt.
Push Divider (P4) into place and tighten the cam nut.
Step 8
You will need:
6 x Long Dowels
(H16)
Insert 6 x Long Dowels (H16) into 3 x Rails (P5) and Divider (P4).
Step 9
You will need:
2 x Cam Nuts
(H4)
Insert 2 x Cam Nuts (H4) into the holes of Rails (P7) and (P8).
Rotate the cam nuts so the arrows point towards
the incoming cam bolts and tighten the cam nuts.
(P3)
(P4)
(P3)
(P4)
H4
H4
(P3)
(P4)
H4
(P6)
(P5)
(P5)
H16
H16
H16
(P7)
(P5)
(P8)
Page 6