Emerson Rosemount 3051 Series Quick Start Manual page 27

August 2023
Standards
Markings
Special Conditions for Safe Use (X):
1. The Rosemount 3051 Transmitter housing contains aluminum
and is considered a potential risk of ignition by impact or
friction. Care must be taken into account during installation
and use to prevent impact and friction.
2. The Rosemount 3051 Transmitter with the transient terminal
block (Option code T1) will not pass the 500 Vrms dielectric
strength test, and this must be taken into account during
installation.
Certificate
Standards
Markings
Specific Conditions for Use
1. The Rosemount 3051 Transmitter housing contains aluminum
and is considered a potential risk of ignition by impact or
Quick Start Guide
FM 3600: 2011, FM 3610: 2010, FM 3611: 2004, FM 3810:
2005, ANSI/NEMA 250: 2008
IS: CL I, DIV 1, GP A, B, C, D T4
CL II, DIV 1, GP E, F, G; CL III
NI: CL 1, DIV 2, GP A, B, C, D; T4
HART: (–50 °C ≤ T
F Fieldbus/PROFIBUS
™
OUNDATION
°C)
INSTALL PER 03031-1019.
Type 4X
1053834
Ranges 1-6
FM 3600: 2022, FM 3610: 2018, FM 3611: 2021,
ANSI/UL 61010-1-2019 Third Edition, ANSI/UL 60079-0:
2017, ANSI/UL 60079-11: 2013, ANSI-ISA-12.27.01–2022,
ANSI/UL 50E (First Edition)
IS: CL I GP ABCD T4
IS: CL II GP EFG; CL III T4
CL I ZN 0 AEx ia IIC T4 Ga
NI: CL I DIV 2 GP ABCD T4
–60 °C ≤ T ≤ +70 °C
a
OPTIONAL: SINGLE SEAL
TYPE 4X IP 68
INSTALL PER 03031-1024
≤ +70 °C)
a
®
Quick Start Guide
-PA: (–50 °C ≤ T
a
≤ +60
27