Daily Maintenance Checklist - Toro Groundsmaster 4110 Operator's Manual

Maintenance Service
Interval
Every 800 hours
Every 1,000 hours
Every 6,000 hours
Every 2 years
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.

Daily Maintenance Checklist

Duplicate this page for routine use.
Maintenance Check Item
Check the safety-interlock
operation.
Check the brake operation.
Check the engine-oil level.
Check the
cooling-system-fluid level.
Drain the water/fuel
separator.
Check the air filter, dust cup,
and burp valve.
Check for unusual engine
noises. 2
Check the radiator and
screen for debris
Check for unusual operating
noises.
Check the hydraulic-system-
oil level.
Check the hydraulic hoses
for damage.
Check for fluid leaks.
Maintenance Procedure
• Drain and clean the fuel tank (also if the fuel system is contaminated).
• Change the front planetary-gear oil.
• Change the rear-axle lubricant.
• Check the rear wheel toe-in.
• Inspect the blade-drive belt.
• Change the hydraulic fluid. Change the hydraulic fluid after every 800 operating
hours, in normal conditions. If the fluid becomes contaminated, contact your local
Toro distributor because the system must be flushed. Contaminated fluid looks milky
or black when compared to clean fluid.
• Change the hydraulic filters.
• Inspect the mower deck caster-wheel assemblies.
• Check and adjust the engine-valve clearance.
• Disassemble, clean, and assemble the soot filter of the DPF. or clean the soot
filter if engine faults
in the InfoCenter.
• Flush the cooling system and replace the fluid.
• Replace moving hoses.
For the week of:
Monday Tuesday
3720 16, 3720
SPN FMI SPN
Wednesday Thursday
52
0, or 3720 16 display
FMI SPN FMI
Friday Saturday Sunday