Servicing The Engine Oil - Toro Groundsmaster 4110 Operator's Manual

Figure 74
Note:
Do not clean the used element due to the
possibility of damage to the filter media.
Important:
Never attempt to clean the safety
filter (Figure 75). Replace the safety filter
after every 3 primary filter services.
1. Air-cleaner safety filter
2. Reset the indicator

Servicing the Engine Oil

Oil Specification
Use high-quality, low-ash engine oil that meets or
exceeds the following specifications:
•
API service category CJ-4 or higher
•
ACEA service category E6
•
JASO service category DH-2
Important:
Using engine oil other than API CJ-4
or higher, ACEA E6, or JASO DH-2 may cause the
diesel particulate filter to plug or cause engine
damage.
g031861
Use the following engine oil viscosity grade:
•
Preferred oil: SAE 15W-40 (above 0°F)
•
Alternate oil: SAE 10W-30 or 5W-30 (all
temperatures)
Toro Premium Engine Oil is available from your
Authorized Toro Distributor in either 15W-40 or
10W-30 viscosity grades. See the parts catalog for
part numbers.
Checking the Engine-Oil Level
Service Interval: Before each use or daily
The engine is shipped with oil in the crankcase;
however, the oil level must be checked before and
after the engine is first started.
Important:
Check the engine oil daily. If the
engine-oil level is above the Full mark on the
dipstick, the engine oil may be diluted with fuel;
59
Figure 75
(Figure 73) if it shows red.
g009712