Daily Maintenance Checklist; Pre-Maintenance Procedures; Preparing The Machine For Maintenance - Toro Greensmaster e1021 Operator's Manual

Daily Maintenance Checklist

Important:
Duplicate this page for routine use.
Maintenance For the week of:
Check Item
Mon.
Check the
brake-lock-lever
operation.
Check for
unusual
operating noises.
Check the
reel-to-bedknife
adjustment.
Check the
height-of-cut
adjustment.
Touch up
damaged paint.
Clean the
machine.
Notation for Areas of Concern
Inspection performed by:
Item
Pre-Maintenance
Procedures
Preparing the Machine for
Maintenance
WARNING
While you are maintaining or adjusting the
machine, someone could start the machine.
Accidentally starting the machine could
seriously injure you or other bystanders.
Release the traction bail, engage the parking
brake, remove the key, and disconnect the
battery before you do any maintenance.
Tues. Wed.
Date
31
Thurs. Fri.
Information
Perform the following before servicing, cleaning, or
making any adjustments to the machine:
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the machine.
4. Wait for all moving parts to stop before servicing,
storing, or making repairs.
5. Disconnect the battery by pulling the T-handle
connector off of the main-power-supply
connector (Figure
Sat. Sun.
30).