Hauling the Machine
•
Use care when loading or unloading the machine
into a trailer or a truck.
•
Use a full-width ramp for loading the machine into
a trailer or a truck.
•
Bind the machine down securely to the trailer.
Locating the Tie-Down
Points
There are tie downs located at the front and rear sides
of the machine
(Figure
Note:
Use properly-rated DOT-approved straps in 4
corners to tie down the machine.
•
2 on the front of the operator's platform
•
Rear bumper
1. Rear tie-down point
50
57).
Figure 57
2. Front tie-down points
g033100