Toro Groundsmaster 4110 Operator's Manual page 33

InfoCenter Icon Description (cont'd.)
Operator should change to the
indicated state
Symbols are often
combined to form
sentences. Some
examples are shown
below
Operator should put the machine in
neutral
Engine start denied
Engine shutdown
Engine coolant is too hot
Hydraulic fluid is too hot
Sit down or engage the parking brake
Using the Menus
To access the InfoCenter menu system, press the
menu access button while at the main screen. This
brings you to the main menu. Refer to the following
tables for a synopsis of the options available from
the menus:
Main Menu
Menu Item
Faults
Service
Diagnostics
Description
The Faults menu contains
a list of the recent machine
faults. Refer to the Service
Manual or your Authorized
Toro Distributor for more
information on the Faults
menu and the information
contained there.
The Service menu contains
information on the machine
such as hours of use and other
similar numbers.
The Diagnostics menu
displays the state of each
machine switch, sensor and
control output. You can use
this to troubleshoot certain
issues as it will quickly tell you
which machine controls are on
and which are off.
Main Menu
Settings
About
Service
Menu Item
Hours
Counts
Diagnostics
Menu Item
Engine Run
Glowplugs
Fan
33
The Settings menu allows
you to customize and modify
configuration variables on the
InfoCenter display.
The About menu lists the
model number, serial number,
and software version of your
machine.
Description
Lists the total number of hours
that the machine, engine and
fan have been on, as well as
the number of hours that the
machine has been transported
and overheated
Lists the number of preheats
and starts that the machine
has experienced
Description
Refer to the Service
Manual or your Authorized
Toro Distributor for more
information on the Engine
Run menu and the information
contained there.
Indicates if the following items
are active: Key start, timeout
limited, and glowplugs
Indicates if the fan is active
in the following instances:
Engine high temp, oil high
temp, engine or hydraulic high
temp, and fan on