Removing The Hood - Toro Groundsmaster 4110 Operator's Manual

Figure 60
1. Hood latch
2. Handle
3. Using the handles that are adjacent to the
latches, lift up and back the hood until the 2 prop
rods are seated in the 2 rod brackets
g037226
g037227
3. Prop rod
(Figure 60).

Removing the Hood

1. Unlatch and raise the hood.
2. Remove the hairpin cotter securing the hood
pivot to the mounting brackets
1. Hairpin cotter
3. Slide the hood to the right side, lift the other
side, and pull it out of the brackets.
Note:
Reverse this procedure to install the hood.
55
(Figure 61).
Figure 61
g031613