Toro Groundsmaster 4110 Operator's Manual page 35

Hide thumbs Also See for Groundsmaster 4110:
Table of Contents

Advertisement

Figure 31
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure
31B and
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure
31D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O
position locks the protected menu.
N
You have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to Protect Settings option. Use the
right button to change the setting. Setting the Protect
Settings to O
allows you to view and change the
FF
settings in the Protected Menu without entering the
PIN code. Setting the Protect Settings to O
protected options and requires you to enter the PIN
code to change the setting in the Protected Menu.
After you set the PIN code, rotate the key switch O
and back to the O
position to enable and save this
N
feature.
Figure
31C). Repeat this step
position and
FF
hides the
N
Setting the Auto Idle
1. In the Settings Menu, scroll down to Auto Idle.
2. Press the right button to change the auto idle
time between Off, 8S, 10S, 15S, 20S, and 30S.
Setting the Maximum Allowed
Mow Speed
1. In the Settings Menu, scroll down to Mow Speed
and press the right button.
2. Use the right button to increase the max full
mow speed (50%, 75%, or 100%).
3. Use the center button to decrease the max full
mow speed (50%, 75%, or 100%).
4. Press the left button to exit.
Setting the Maximum Allowed
Transport Speed
g028522
1. In the Settings Menu, scroll down to Transport
Speed and press the right button.
2. Use the right button to increase the max
transport speed (50%, 75%, or 100%).
3. Use the center button to decrease the max
transport speed (50%, 75%, or 100%).
4. Press the left button to exit.
When finished with the Protected Menu, press the left
button to exit to the Main Menu, then press the left
button to exit to the Run Menu.
FF
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

30644

Table of Contents