Table of Contents
Advertisement
4 INSTALLATION
4
INSTALLATION
The installation must be carried out by a professional.
CAUTION!
This product is intended for industrial use. In a domestic environment this product may
cause radio interference. It is the user's responsibility to take adequate precautions.
4.1
Location
Position the power source so that cooling air inlets and outlets are not obstructed.
WARNING!
Secure the equipment - particularly if the ground is uneven or sloping.
4.2
Lifting instructions
These units are equipped with a handle for carrying purposes.
WARNING!
Electric shock can kill. Do not touch live electrical parts. Disconnect input power
conductors from de-energized supply line before moving the welding power source.
WARNING!
Falling equipment can cause serious personal injury and equipment damage.
Lift the unit with handle on top of case.
0463 732 201
A. Minimum 200 mm (8 in.)
B. Minimum 200 mm (8 in.)
- 12 -
© ESAB AB 2022
Advertisement
Table of Contents
