Toshiba LF620F Instruction Manual page 94

Switch operation
STEP2
STEP3
STEP4(=END)
●Changing the high/low alarm value
The following is an example to change the high alarm value from +105% to +103%.
Switch operation
STEP1
STEP2
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Display example
H SET
The switches at the bottom change.
(
OFF
At the same time, the cursor appears.
(The item indicated by the cursor is
highlighted.)
Then push
H SET
You can continue to change the setting item.
Push
ON
items.
When the desired item is selected, push
H SET
When you push
to confirm whether the setting is OK or not.
ON
If OK, push
setting, push
SET OK?
Pushing
and exits the setting screen.
ESC
O K N O
Display example
L:H/L ALM1
Select "H VAL" from the setting item
1 H SET
selection menu.
2 H VAL
3 L SET
4 L VAL
5 EXIT
ESC
H VAL
The currently set value (+105% in this
example) appears.
+105.0
Then push
%
ESC
H VAL
The switches at the bottom change.
(
+105.0
At the same time, the cursor appears.
%
－ 93 －
6 F 8 A 0 9 2 8
Description
are shown.)
.
to change the selection
: Selected item is scrolled up.
: Selected item is scrolled down.
to set the item temporarily.
, a message appears
O K
. If you want to redo the
N O .
ESC
cancels the setting operation
Description
.
are shown.)