Meter Size - Toshiba LF620F Instruction Manual

Switch operation
STEP6
STEP7(=END)
O K
Note: The setting range of excitation current value is from 0.0000A to 0.2500A.
If you try to set an exciting current value larger than 0.2500A, an error message appears
and the setting value returns to the previous value.

8.2.3 Meter Size

Proceed as follows to check or change the meter size of the detector.
Switch operation
STEP1
STEP2
STEP3
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Display example
EXC CUR
Pushing
the setting is OK or not.
0.2150
If OK, push
setting, push
A
Pushing
SET OK?
and exits the setting screen.
ESC
O K N O
EXC CUR
When you push
message, the set value is fixed.
0.2150
Then pushing
A
setting menu. If you push
change the current value from 0.2150A
ESC
again.
Display example
A:DETECTOR
Select "SIZE" from the setting item
1 EXC CUR
selection menu.
2 SIZE
3 EXC FREQ
4 FLOW DIR
5 EXIT
ESC
SIZE
The currently set meter size (50mm in this
example) appears.
50
Then push
mm
Pushing
ESC
menu.
SIZE
The switches at the bottom change.
(
50
At the same time, the cursor appears.
(The item indicated by the cursor is
mm
highlighted.)
Then push
SIZE
You can continue to change the setting
value.
65
Push
items.
mm
－ 57 －
6 F 8 A 0 9 2 8
Description
shows a message to confirm
O K
. If you need to redo the
.
N O
cancels the setting operation
ESC
to "SET OK?"
O K
brings you back to the
ESC
, you can
Description
.
returns you to the setting
ESC
are shown.)
.
to change the selection
: Selected item is scrolled up.
: Selected item is scrolled down.