Toshiba LF620F Instruction Manual page 102

* However, if a wrong password is entered when the mode is changed from the measuring mode to the
setting mode, *** appears and the password cannot be checked.
Switch operation
●Changing the password
The following is an example to change the password from 123 to 453.
Switch operation
STEP1
STEP2
STEP3
STEP4(=END)
Note 1: If you set 000 for the password, it is considered as if the password is not used. In this case, the
password input confirmation screen does not appear when you move from the measurement
mode to the setting mode and all parameter setting items and restrictions on the parameter
setting items and calibration screen will be released.
Note 2: When you set your password, please be sure not to forget your password.
The password including how to check the password should be managed based on the
management standard of the system you use.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Display example
PASSWORD
The currently set password is displayed as
*** and the password cannot be checked.
***
ESC
Display example
PASSWORD
Select "PASSWORD" from the setting item
selection menu.
123
The currently set password (123 in this
example) appears.
Then push
ESC
PASSWORD
The switches at the bottom change.
(
123
At the same time, the cursor appears.
PASSWORD
Push
digit you want to change and push
453
to change the number of the digit.
PASSWORD
When you push
to confirm whether the setting is OK or not.
453
If OK, push
setting, push
SET OK?
Pushing
and exits the setting screen.
O K
ESC N O
－ 101 －
6 F 8 A 0 9 2 8
Description
Description
.
are shown.)
to move the cursor to the
, a message appears
O K
. If you want to redo the
N O .
ESC
cancels the setting operation