Table of Contents
Advertisement
The following items appear when you set Power Mode to [ATX Type].
Restore AC Power Loss [Always Off]
[Last State]
[Always On]
[Always Off]
RTC Wake system from S5 [Disabled]
[Disabled]
[Fixed Time]
[Dynamic Time]
The following items appear when Fixed Time is enabled.
Wake up day/hour/minute/second [0]
Specify the values for day/hour/minute/second.
The following item appears when Wake System with Dynamic Time is enabled.
Wake up minute increase [1]
Specify the number of minutes added to the current time before waking up
system. Input value range: [1~5]
3-14
The system goes into either off or on state, whatever the system
state was.
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
Disables system wake up from S5.
The system will wake up at the specified hr::min::sec.
Configuration options: [Disabled] [Enabled] .
The system will wake up at the current time plus a specified
number of minutes.
IMBM-H110A
Advertisement
Table of Contents
