Table of Contents
Advertisement
9.
USB 2.0 connector (10-pin USB56, USB78, USB910)
This USB connectors complies with USB 2.0 specifications.
IMBM-H110A
IMBM-H110A USB2.0 connectors
Never connect a 1394 cable to the USB connector. Doing so will damage the
motherboard.
10. Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~5)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
IMBM-H110A
IMBM-H110A Intel
NOTES:
•
You must install Windows
•
When using hot-plug and NCQ, set the SATA Mode Selection item in the
BIOS to [AHCI]. See section 3.3.3 SATA Configuration for details.
Chapter 2: Motherboard information
USB2_56~910
PIN 1
SATA6G_1
SATA6G_4
SATA 6 Gb/s connectors
®
7 before using Serial ATA hard disk drives.
®
SATA6G_2
SATA6G_3
SATA6G_5
2-23
Advertisement
Table of Contents
