Making/Answering Calls; Making Calls; Answering Calls; Useful Features During A Call - Panasonic KX-TGD432 Operating Instructions Manual

Making calls

1
Lift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
2
M N or MZN
R To adjust the receiver or speaker
volume, press MDN or MCN repeatedly.
3
When you finish talking, press MOFFN.
Note:
R To switch to the speaker, press MZN.
To switch back to the receiver, press MZN/
M N.
R In step 1, you can store the dialed phone
number to the phonebook by pressing
MSAVEN.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list.
1
MEN REDIAL
2
MbN: Select the desired entry. a M
Pause (for PBX/long distance
service users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 18).
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
9 a MDN (Pause)
2
Dial the phone number. a M

Answering calls

1
Lift the handset and then press M
M N when the unit rings.
2
When you finish talking, press MOFFN.
For assistance, please visit http://shop.panasonic.com/support
TGD51x_OI(en)_1129_ver031.pdf 13

Making/Answering Calls

Auto talk: You can answer calls simply by
lifting the handset (page 23).
Temporary handset ringer off: Press M
(left soft key).
Adjusting the ringer volume
Handset
Press MDN or MCN repeatedly while ringing.
R To turn the ringer off, press MCN repeatedly.
Base unit *1
*1 KX-TGD530 series
Press MjN or MkN repeatedly.
R To turn the ringer off, press and hold MkN
until the unit beeps.
One-touch ringer off for the handset
Press and hold 0 (
turn the ringer off. While the ringer is turned
off, the handset will not ring for calls.
R You can turn the ringer on again by
pressing and holding 0 (
beeps.
N
Useful features during a
call
Hold
1
Press MMENUN during an outside call.
2
MbN: "Hold" a MSELECTN
3
To release hold, press M
R Another handset user can take the call
by pressing M
N
Note:
R After holding for 10 minutes, the call is
disconnected.
Mute
N or
1
Press MMUTEN during a call.
2
To return to the call, press MMUTEN.
N
) until the unit beeps to
) until the unit
N.
N.
13
2016/11/29 10:57:37