Advertisement
ASSEMBLY
Pull-Type Hitch Kit - Optional
5-7 FT Models
1. Attach Drawbar to the center of the front Frame Tube
with 1/2-13 U-Bolts, Lock Washers, and Nuts. See
Figure 2-6.
2. Install Braces on each side of the Drawbar. Attach
Braces to the Frame Outer Lugs with 3/4-10 x 1-3/4
Bolts, Lock Washers, and Nuts. Secure both Braces
to the Drawbar with 1/2-13 x 5-1/2 Bolt, Lock Washer,
and Nut.
3. Mount Hitches to the Drawbar with 1/2-13 x 2 Bolts,
Lock Washers, and Nuts.
Bolt,1/2-13 x 2
Hitch
2-4
TABLE OF CONTENTS
Bolt,3/4-10 x 1-3/4
Brace
Bolt,1/2-13 x 5-1/2
Washer,1/2
Drawbar
Lock Washer,1/2
Nut,1/2-13
Figure 2-6: Hitch Kit, PP5-7
8 FT Models
1. Attach Drawbar to the center of the front Frame Tube
with 1/2-13 U-Bolts, Lock Washers, and Nuts. See
Figure 2-7.
2. Center and Position Angle Brackets 30-5/8" apart on
the front Frame Tube. See Figure 2-8. Secure with
1/2-13 U-Bolts, Lock Washers, and Nuts.
3. Install Braces on each side of the Drawbar. Attach
Braces to the Angle Brackets with 3/4-10 x 1-3/4
Bolts, Lock Washers, and Nuts. Secure both Braces
to the Drawbar with 1/2-13 x 5-1/2 Bolt, Lock Washer,
and Nut.
4. Mount Hitches to the Drawbar with 1/2-13 x 2 Bolts,
Lock Washers, and Nuts.
U-Bolt,1/2-13 x
5-1/2 x 4-9/16
Lock
Washer,1/2
Nut,1/2-13
Nut,3/4-10
Lock Washer,3/4
Bolt,3/4-10 x 1-3/4
Lock
9J893-2307
INDEX
Advertisement
