Advertisement
ASSEMBLY
Scraper Kit (Notched Ductile
Wheel 8J001) - Optional
NOTE
A Scraper can be used as a guide to achieve the 1/4" gap
between the Scraper and the Notched Wheel.
1. Place the Pulverizer Roller on level ground.
2. Attach Scraper Brackets to the Scraper Tube with
1/2-13 x 3-1/2 Bolts, Flat Washers, Lock Washers,
and Nuts. See Figures 2-2 and 2-3.
3. Center Scraper Tube on the Notched Ductile Wheel
Roller and attach Scraper Brackets to the Frame
Tube with 1/2-13 x 5-1/2 U-Bolts, Lock Washers, and
Nuts.
4. Center the Scrapers between the Notched Wheels.
Position the Scrapers so that there is a 1/4" gap
between the Scraper and the Notched Wheel. See
Figure 2-2. Secure with 3/8-16 x 2-7/16 U-Bolts, Flat
Washers, Lock Washers, and Nuts.
U-Bolt,1/2-13 x
5-1/2 x 4-9/16
Lock Washer,1/2
2-2
TABLE OF CONTENTS
Nut,1/2-13
Lock Washer,1/2
Flat Washer,1/2
Lock Washer,1/2
Nut,1/2-13
Nut,1/2-13
Flat
Scraper Tube
Washer,1/2
Figure 2-3: Scraper Kit Installation
a
Scraper
Bracket
Scraper Tube
Scraper
Notched
Wheel
1/4" Gap
Figure 2-2: Scraper Kit Detail
Scraper
Bracket
U-Bolt,3/8-16 x
3-1/4 x 2-7/16
Flat
Washer,1/2
Bolt,1/2-13 x 3-1/2
Scraper
Bracket
Bolt,1/2-13 x 3-1/2
INDEX
Front
Scraper Tube
Scraper
Lock
Washer,3/8
Nut,3/8
Flat
Washer,3/8
9J893-2307
Advertisement
