Advertisement
INDEX
Scraper Kit (Notched Gray
Iron Wheel 8C988) - Optional
1. Place the Pulverizer Roller on level ground.
2. Attach short Angles to the Scraper Angle with 1/2-13
x 1-1/2 Bolts, Flat Washers, Lock Washers, and Nuts.
See Figures 2-4 and 2-5.
3. Attach Scraper Brackets to the short Angles with
1/2-13 x 1-1/2 Bolts, Flat Washers, Lock Washers,
and Nuts.
4. Center Scraper Angle on Notched Gray Iron Wheel
Roller and attach Scraper Brackets to the Frame
Tube with 1/2-13 x 5-1/2 U-Bolts, Lock Washers, and
Nuts.
5. Center the Scrapers between the Notched Wheels.
Position the Scrapers so that there is a 1/4" gap
between the Scraper and the Notched Wheel. See
Figure 2-4. Secure with 3/8-16 x 1-1/2 Carriage Bolts,
Flat Washers, Lock Washers, and Nuts.
Lock
Washer,1/2
Nut,1/2-13
Scraper Angle
Flat Washer,1/2
9J893-2307
TABLE OF CONTENTS
Lock Washer,1/2
U-Bolt,1/2-13 x
5-1/2 x 4-9/16
Scraper Bracket
Bolt,1/2-13
x 3-1/2
Angle
Bolt,1/2-13 x 3-1/2
Figure 2-5: Scraper Kit Installation
a
Scraper
Bracket
Angle
Scraper
Angle
Scraper
Notched
Wheel
1/4" Gap
Figure 2-4: Scraper Kit Detail
Nut,1/2-13
Flat Washer,1/2
Lock Washer,1/2
Nut,1/2-13
Nut,3/8-16
Lock Washer,3/8
Flat
Washer,3/8
ASSEMBLY
Front
Scraper Bracket
Nut,1/2-13
Lock
Washer,1/2
Angle
Bolt,1/2-13
x 3-1/2
Scraper
Angle
Scraper
Carriage Bolt,
3/8-16 x 1-1/2
Flat
Washer,1/2
Bolt,1/2-13 x 3-1/2
2-3
Advertisement
