1. Introduction The Digitus HDMI Extender Set, Full HD offers an extender solution of up to 50 m for the highest demands. It is used to transmit digital video and audio signals to a maximum length of up to 50 m. The highest supported video resolution is 1080p / 60Hz.
3. Package Content 1x HDMI Extender transmitter unit • 1x HDMI Extender receiver unit • 1x Power supply unit: DC 5V/2A • • 1x IR transmitter unit • 1x IR receiver unit 1x Instruction manual • 4. Specification Support HDCP 1.2a Bandwidth 4.95 Gbps Color depth...
Page 5
HDMI signal indicator led: it lights on all the time when ③ HDMI signal input, flashes when no signal input Reset button ④ DC 5V power input ⑤ HDMI signal output ⑥ EDID switch ⑦ HDMI signal input ⑧ Receiver unit (RX) DC 5V power input ①...
6. Connection HDMI EXTENDER RX HDMI EXTENDER TX HDMI OUT CAT6/6A/7 Cable HDMI display 7. Installation Requirements 1. HDMI source device (computer graphics card, DVD, PS3, HD monitoring equipment etc.). 2. HDMI display device like SDTV, HDTV, and projector with HDMI port. 3.
Page 7
read and save the EDID of the loop-out TV Default EDID: 1080P 3D 2.1CH Set the source device resolution to “Auto.” Don’t set any specific resolution of the source device. HDMI source device reads the EDID information of the transmitter (TX) and then output the Relative HDMI signal forma.
Page 8
This is a Class A product. In home environment, this product may cause radio interference. In this case, the user may be required to take appropriate measures. Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
Need help?
Do you have a question about the DS-55100-1 and is the answer not in the manual?
Questions and answers