Lectrosonics SMWB/E07 Series Instruction Manual page 3

Wireless microphone transmitters and recorders
Table of Contents

Advertisement

ISEDC Notices:
Per RSS-210
This device operates on a no-protection no-interference basis. Should the user seek to obtain
protection from other radio services operating in the same TV bands, a radio licence is required.
Please consult Industry Canada's document CPC-2-1-28, Optional Licensing for Low-Power
Radio Apparatus in the TV Bands, for details.
Ce dispositif fonctionne selon un régime de non-brouillage et de non-protection. Si l'utilisateur
devait chercher à obtenir une certaine protection contre d'autres services radio fonctionnant
dans les mêmes bandes de télévision, une licence radio serait requise. Pour en savoir plus,
veuillez consulter le document CPC-2-1-28 d'Industrie Canada intitulé, Délivrance de licences
sur une base volontaire pour les appareils radio de faible puissance exempts de licence et ex-
ploités dans les bandes de télévision.
Per RSS-Gen
This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the
following two conditions:
1) This device may not cause interference
2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
ex¬empts de licence. L'exploitation est autorisée aux deux conditions suivantes :
1) l'appareil ne doit pas produire de brouillage;
2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est suscep
tible d'en compromettre le fonctionnement.
This device complies with ISED Canada radiation exposure limits as set forth for a controlled
"professional" use only.
Cet appareil est conforme avec les normes d'Industrie Canada concernant les limites
d'exposition aux radiations pour un usage professionnel contrôlé seulement.
This radio transmitter (8024A-SMWBA1 and 8024A-SMWBB1) has been approved by Indus-
try Canada to operate with the antenna types listed below with the maximum permissible gain
indicated. Antenna types not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
Band A1: AMM19; 2.15 dBi gain
Band B1: AMM22; 2.15 dBi gain
Rio Rancho, NM
Digital Hybrid Wireless Belt-Pack Transmitters
3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMWB/E07 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Smwb/e07Smdwb/e07

Table of Contents