Maintenance; Cleaning; Fuse Replacement; Figure 7-1 | Tuner Bottom View - Acom 06AT User Manual

7. MAINTENANCE

The user IS NOT expected to perform any repairs, except replacing fuses (see Section
and repairing antennas or coaxial cables on the feeders.
If needed, call your dealer's service provider or the manufacturer directly (see Section

7.1. Cleaning

Do not use any solvents for cleaning. They may be dangerous to you and damage tuner
surfaces.
Do not disassemble the tuner. Cleaning of the tuner outer surface can be done with a piece of soft cotton
cloth lightly moistened with clean water.

7.2. Fuse Replacement

For replacement, only use standard fuses from the types recommended below.
There are two fuses in the tuner. They are located at the bottom of the tuner, under a small cover (see
, Pos. 1). The fuses are European size 5x20 mm, ceramic (or glass) body cartridge.
7-1 | Tuner bottom view
Page 48 of 70 | S e c t i o n MAINTENANCE
User's Manual | ACOM 06AT | Automatic Antenna Tuner and Switch
CAUTION
NOTICE

Figure 7-1 | Tuner bottom view

Figure 7-1 | Tuner bottom view
)
7.2 Fuse Replacement
).
1.3 Owner Assistance
Figure
1
October 2022